HTB-3100A-C
netLINK 10/100M Single-mode Single-fiber WDM Fiber Media Convert Card
HTB-3100A-C is a 10/100M self-adapted single-fiber single-module with transmittal distance 25KM media converter, this card type media converter can be used with our 16 slots media converter rack mount chassis and powered by it, easy installation and maintainance for network station connection. it should be work with HTB-3100B-C.netLINK Series 10/100M Singlemode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 90km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users.
-
Specification & FeatureFeature
- The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
- Auto negotiation function allows UTP port to auto select 10M or 100M and Full Duplex or Half Duplex.
- UTP port supports MDI / MDI-X auto crossover
- Supporting flow control
- Supporting 1552 Byte packet
- Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction.
- Design of internal or external power supply for selection by users
Specification- Operating standards: IEEE802.3u, 10/100Base-TX and 100Base-FX
- MAC address table: 1K
- Connector:
- UTP: RJ-45 10/100Mbps;
- Fiber: SC 100Mbps
- Cable:
- UTP: Cat. 5 UTP (the max distance up to 100m)
- Fiber(Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 90km)
- Flow Control
- Full Duplex: IEEE802.3x
- Half Duplex: Backpressure
- LED: Power, FX 100, FX Link/Act, TX 100, TX FDX, TX Link/Act.
- Power: AC 110V - 220V to DC 5V; DC48V to DC 5V
- Ambient temperature: 0 ~ 50℃
- Storage temperature: -20 ~ +70℃
- Humidity: 5% ~ 90%
-
Order Information
Order Information Type Fiber type Connector Wavelength TX power Sensitivity Max.distance Link Budget HTB-3100A/B-25 singlemode SC 1310/1550nm -14~-6dBm -32dBm 20km 18dBm HTB-3100A/B-40 singlemode SC 1310/1550nm -5~0 dBm -35dBm 40km 30dBm HTB-3100A/B-60 singlemode SC 1310/1550nm -8~-2 dBm -36dBm 60km 28dBm HTB-3100A/B-80 singlemode SC 1310/1550nm -3~0 dBm -37dBm 80km 34dBm Note 10/100M Singlemode Single Fiber Converters must be used and ordered in couples. One set of HTB-3100A must be connected with another set of HTB-3100B for using. HTB-3100A transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; HTB-3100B transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40, 60, 80km.
