• netLINK 1000M Single-mode Single Fiber Optic Ethernet Media Converter

HTB-GS-03-A/B

netLINK 1000M Single-mode Single Fiber Optic Ethernet Media Converter



  • Specification & Feature

    Description

    netLINK Series Gigabit Fiber Converter can convert Optical-Electric Ethernet signals between 10/100/1000M UTP interface (TX) and 1000M optical fiber interface (FX). The traditional 10/100/1000M gigabit Ethernet can be extended to the distance of 100km through optical fiber link. The performance and quality of the products are excellent because of adopting latest Gigabyte IC from USA and Taiwan. 6 Group LED indicated lights could fully monitor the working conditions of converters. It is easy for users to observe and?diagnose the failure of converters.


    Feature
    • The transmission of a channel optical signals can be completed by single fiber. It has doubled in quantity of fiber data transmission compared with twin fiber type.
    • Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
    • UTP port supports MDI / MDI-X auto crossover.
    • Supporting the max 1536 byte Ethernet packet
    • Supporting flow control
    • Adopting internal power supply

    Specification
    • Operating standards: IEEE802.3z/AB 1000Base-T, 1000Base-SX/LX
    • MAC address table:4K
    • Data Buffer:256K
    • Connector:
      • UTP: RJ-45, 10/100/1000Mbps
      • Fiber: SC,1000Mbps
    • Cable:
      • UTP: Cat 5e or Cat 6 (the max distance up to 100m) 
      • Fiber (multimode): 50/125, 62.5/125μm (the max distance up to 550/224m)
      • Fiber (singlemode): 8.3/125, 8.7/125, 9/125μm (the max distance up to 100km)
    • Flow Control
      • Full Duplex: IEEE802.3x flow control
      • Half Duplex: back pressure flow control
    • Power: AC110-240V to DC5V; DC 48V to DC5V.
    • Ambient temperature: 0 ~ 50℃
    • Storage temperature: -40 ~ 70℃
    • Humidity: 5% ~ 90%
    • Dimensions: 40 (high) x 110 (width) x 140 (length) mm

    Order Information
    Type
    Fiber type
    Connector
    Wavelength
    TX power
    Sensitivity
    Max.distance
    Link Budget
    HTB-GS03-A/B-25
    singlemode
    SC
    1310/1550nm
    -14~-6dBm
    -32dBm
    20km
    18dBm
    HTB-GS03-A/B-40
    singlemode
    SC
    1310/1550nm
    -5~0 dBm
    -35dBm
    40km
    30dBm
    Note
    10/100M/1000M Singlemode Single Fiber Converters must be used and ordered in couples. One set of A must be connected with another set of B for using. A transmitted optical wavelength 1310nm, receive optical wavelength 1550nm; B transmitted optical wavelength 1550nm, receive optical wavelength 1310nm. The distance of fiber is up to 20, 40km.
  • Datasheet
    datasheet of netLINK 1000M Single-mode Single Fiber Optic Ethernet Media Converter HTB-GS-03-A-B.pdf
  • User Manual
  • Software
  • Order Information



Copyright © 2003-2018 Hexin Technology All rights reserved.